Axial SCX10 & SCX10 II Aluminum Rolling Beads Pendulum Wheel Knuckle Axle Weight + 21mm Hex Adapter - 1Pr Set Black

Axial SCX10 & SCX10 II Aluminum Rolling Beads Pendulum Wheel Knuckle Axle Weight + 21mm Hex Adapter - 1Pr Set BlackProduct Name : Aluminum Rolling Beads Pendulum Wheel Knuckle Axle Weight + 21mm Hex Adapter 1Pr Set Stainless steel rolling beads are designed to carry additional weight of 64 grams for each wheel keeping the weight downward towards the ground for better grabby performance. The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly

• Product Name : Aluminum Rolling Beads Pendulum Wheel Knuckle Axle Weight + 21mm Hex Adapter - 1Pr Set
• Stainless steel rolling beads are designed to carry additional weight of 64 grams for each wheel keeping the weight downward towards the ground for better grabby performance. The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level. The high quality of the stainless steel is very suitable for muddy watery track with no fears of getting rusty.
• Install onto the front & rear outer case of the knuckles. To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing 4g each. Weight per piece : 44-64 grams (with 8 rolling beads, we recommend keeping at least 3 beads for better performance). 21mm widen hex adpater is included (16mm wider than original). This product is ONLY suitable for wheels with 5mm thread hole and minimum 45mm inner diameter.
• Accessories included : 21mm Hex Adapter-2pcs ; Stainless Steel Pin 2x10-2pcs ; 5mm Spring Steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 19mm Stainless Steel Hex Socket Screws-2pcs.
• Will fit : Axial 1/10 SCX10, SCX10 II ; Gmade 1/10 SAWBACK, SAWBACK 4LS, KOMODO