Clear-Com CZ-DX410-4UP 2.4GHz Wireless Intercom System (4-User)

Clear-Com CZ-DX410-4UP 2.4GHz Wireless Intercom System (4-User)The DX410 is a newly designed two channel digital wireless system, operating in the 2. 4GHz band, that delivers an overall better experience in performance, range and sound. The system features 7kHz wideband audio, 2 wire and 4 wire bridging, and 2 wire auto nulling for fast integration with Clear Com or TW wired partyline systems. The BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and or WH410

The DX410 is a newly designed two-channel digital wireless system, operating in the 2.4GHz band, that delivers an overall better experience in performance, range and sound. The system features 7kHz wideband audio, 2-wire and 4-wire bridging, and 2-wire auto-nulling for fast integration with Clear-Com or TW wired partyline systems.

The BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.

The BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.

The AC50 is a battery charger for the BAT50 batteries. The AC50 can charge up to four BAT50s simultaneous with additional reserve slots for four extra batteries. Charge time is 2.5 hours.

System Includes the following:

• BS410 wideband 7KHz, two channel base station w/2 antennas.
• 115-230 VAC power supply, includes power cord.
• 4 BP410 belt packs with 8 AC50 batteries;
• 5 CC-15-MD4 single ear noise canceling headsets, (Shown in image 5 above)
• AC50 battery charger;
• 110-240VAC power supply, with US adapter plug. For US and Canada sales.

Features

BS410 Features:

• Two-channels
• 7kHz wideband audio
• 2-wire and 4-wire bridging
• 2-wire auto-nulling
• Lost packet concealment
• Upgraded radio
• Supports up to 15 beltpacks and/or wireless headsets

BP410 Features:

• Two-channel
• 7kHz wideband audio
• Up to 15 beltpacks and/or all-in-one handsets on a single system
• Single or dual-channel operation
• Up to 12 hours of battery life

AC50 Features:

• Charges 4 batteries simultaneously
• 4 additional battery storage slots
• LED status indicator lights
• Green LED status indicator on top and bottom

Specifications BS410

Audio

• Channels: 2 audio channels
• Capacity: Up to 15 BP410 and/or WH410 per base station
• Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
• Radio Frequency Range: 2400 - 2483.5 MHz
• Audio Frequency: 200 Hz - 7kHz
• 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
• 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
• Aux Input: XLR-3F with ¬" (6.35mm) combo jack, 600 Ohms balanced, level adjustable
• Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
• Headset Connector: 4-pin mini-DIN, Electret microphone
• Headset Output: 200mW into 32 Ohms
• Antenna Type: External 1/2-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
• System Distortion: <2%
• Communication Security: 64-bit encryption, dual-slot diversity

Transmitter

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• Transmit Power: 100mW burst
• Modulation Type: Gaussian filtered FSK, TDMA
• Frequency Stability: 13 ppm
• Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• RF Sensitivity: <-90dBm w 10-3 BER
• Frequency Stability: 13 ppm
• Distortion: <2%
• Power Requirements: 100 - 240 VAC, 50 - 60 Hz or 12 - 14 VDC
• Environmental: Temperature: +32°F - +122°F (0°C - +50°C)
• Dimensions 1.75 x 19.0 x 17.13 in (44 x 483 x 435 mm) (HxWxD)
• Weight 9 lbs (4.1 kg)

Specifications BP410

Audio

• Channels: 2 audio channels
• Frequency Range: 2400 MHz - 2483.5 MHz
• Frequency Response: 200 Hz - 7 kHz
• Antenna: Internal, horizontal/vertical diversity
• Headset Connector: 4-pin, mini-DIN
• Microphone: Electret
• Headset Output: 160mW into 32 Ohms
• Communication Security: 64-bit encryption
• System Distortion: <2%
• Controls: Power, Volume-Up, Volume-Down, A, B, ISO
• Indicators: Dual-color LED (red/green)
• Battery Requirements: 3.6V lithium-ion
• Battery Life: Up to 12 hours
• Antenna Internal, Horizontal/Vertical diversity

Transmitter

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• Transmit Power: 100mW burst
• Modes: Momentary or Latch
• Type: Gaussian filtered FSK, TDMA
• Frequency Stability: 13 ppm
• Harmonics/Spurious: Exceeds FCC and ETSI specifications

Receiver

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• RF Sensitivity: <-90dBm w 10-3 BER
• Frequency Stability: 13 ppm
• Distortion: <2%
• Environmental 32°F to +122°F (0°C to +50°C)
• Dimensions 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
• Weight 7.4 oz (0.21 kg) including battery and pouch

Specifications AC50

Power Supply

• Wall plug with switchable adapters
• Input Voltage: 85 - 264VAC; 100 - 240VAC; nominal
• Output Voltage: 5V; 3A
• MTBF (min.): 200,000 hours demonstrated

Temperature

• Operating: 32°F - +122°F (0°C - +50°C)
• Storage: -40°F - +176°F (-40°C - +80°C
• Humidity: 0 - 95%, non-condensing
• Dimensions 5.4in W x1.4in H D (137.2mm x 35.6mm x 162.6mm)
• Weight 3.5lbs (1.59kg)

Item Includes:

• DX410 wideband 7KHz, two channel base station w/2 antennas.
• 115-230 VAC power supply, includes power cord.
• 4 BP410 belt packs with 8 BAT50 Li-Ion batteries;
• 5 CC-15-MD4 single ear noise canceling headsets,
• AC50 battery charger;
• 110-240VAC power supply, with US adapter plug. For US and Canada sales.