Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Edge Products Accessory System EAS (expandable)The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy chain style to the Evolution CS2, CTS2 or CTS3. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. My Style Software Add up to 16 additional sensors
The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS2, CTS2 or CTS3. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge.
My Style Software
Add up to 16 additional sensors with the EAS universal senor input. Then setup, configure and customize those sensors through Edges My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS2, CTS2 or CTS3 and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units,
EGT PROBE
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
TURBO TIMER
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.
EAS UNIVERSAL SENSOR INPUT
The EAS Universal Senor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS2, CTS2 or CTS3. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS2, CTS2 or CTS3! Using the Edge Accessory System provides the following benefits:
Using My Style software, sensors can be easily configured and renamed.
Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS2, CTS or CTS3 device.
Note: Sensors from the manufactures other than Edge can also be attached to a CS2, CTS2 or CTS3 device through the EAS universal sensor input.
Eliminates the necessity of routing multiple wires to the CS2, CTS2 or CTS3 monitor.
EAS PRESSURE SENSOR
Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.
EAS TEMPERATURE SENSOR
The EAS Temperature Sensor is a 40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Senor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS2, CTS2 or CTS3 monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.
EAS AMBIENT TEMPERATURE SENSOR
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a 40F to 230 F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now you'll never wonder what outside temperature is again.* - EAS Starter Kit Cable required ** - EAS Starter Kit Cable and EAS Universal Sensor Input requiredThe EAS Starter Kit Cable is required to connect a EAS system to any CS2, CTS2 or CTS3 device. Only one EAS starter kit Cable required per CS2, CTS2 or CTS3 device.The EAS Universal (5 volt) Sensor Input is also required to add any sensor. One Universal Sensor Input can connect up to 2 different sensors.
Part Numbers & Applications:
EAS Starter Kit Cable (required For EAS) - 98602EAS
EGT Expandable w/o Starter Kit - 98611EAS
Turbo Timer (Dodge 2006-2012 Only) - 98612EAS
Turbo Timer - 98604EAS
Universal Sensor Input (5 Volt) - 98605EAS
Pressure Sensor 0-100 psig 1/8 NPT - 98607EAS
-40F to 300F 1/8" NPT Temp Sensor - 98608EAS
Ambient Temp Sensor -40F tp 230F Waterproof 0.2" diameter sensor - 98610
My Style Software
Add up to 16 additional sensors with the EAS universal senor input. Then setup, configure and customize those sensors through Edges My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS2, CTS2 or CTS3 and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units,
EGT PROBE
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
TURBO TIMER
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.
EAS UNIVERSAL SENSOR INPUT
The EAS Universal Senor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS2, CTS2 or CTS3. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS2, CTS2 or CTS3! Using the Edge Accessory System provides the following benefits:
Using My Style software, sensors can be easily configured and renamed.
Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS2, CTS or CTS3 device.
Note: Sensors from the manufactures other than Edge can also be attached to a CS2, CTS2 or CTS3 device through the EAS universal sensor input.
Eliminates the necessity of routing multiple wires to the CS2, CTS2 or CTS3 monitor.
EAS PRESSURE SENSOR
Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.
EAS TEMPERATURE SENSOR
The EAS Temperature Sensor is a 40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Senor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS2, CTS2 or CTS3 monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.
EAS AMBIENT TEMPERATURE SENSOR
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a 40F to 230 F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now you'll never wonder what outside temperature is again.* - EAS Starter Kit Cable required ** - EAS Starter Kit Cable and EAS Universal Sensor Input requiredThe EAS Starter Kit Cable is required to connect a EAS system to any CS2, CTS2 or CTS3 device. Only one EAS starter kit Cable required per CS2, CTS2 or CTS3 device.The EAS Universal (5 volt) Sensor Input is also required to add any sensor. One Universal Sensor Input can connect up to 2 different sensors.
Part Numbers & Applications:
EAS Starter Kit Cable (required For EAS) - 98602EAS
EGT Expandable w/o Starter Kit - 98611EAS
Turbo Timer (Dodge 2006-2012 Only) - 98612EAS
Turbo Timer - 98604EAS
Universal Sensor Input (5 Volt) - 98605EAS
Pressure Sensor 0-100 psig 1/8 NPT - 98607EAS
-40F to 300F 1/8" NPT Temp Sensor - 98608EAS
Ambient Temp Sensor -40F tp 230F Waterproof 0.2" diameter sensor - 98610
WARRANTY INFO:
1 Year
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 2308 reviews
Sort
Product Reviews
★★★★★ 4
One of Marvins better offerings
Like the Killers before marvin was almost destined to play the part of Walker in this fast moving gut wrenching but always realistic thriller brilliantly collaborated by Marvin and Boorman who had no peer in this type of film.For those unenlightened souls who downplay Marvins career this was the one that to my mind surpassed most of his prior efforts with the exception of the Killers which was above par in all respects.Marvin was ahead of the pack in the 60s playing this type of hard nosed no nonsense gangster type, no other actor came close and type casted him to some extent in this type of role which unlike may actors became a positive in his career. Just to show his brilliance as an actor he gave us later comedy roles which produced more acting accolades than that material for which he was better known namely what we see in Point Blank.He carries the whole movie as did all the great actors of that era and many since which in itself is the hallmark of greatness. Marvin was a man who so perfectly personified the parts he was playing that often other actors looked wooden in comparison.He was one of the rare individuals who could take a small co starring role and end up being the star of the movie, no mean feat when you were up against the best in the business at that time and there were plenty in the 60 and 70s.To my mind Point Blank will always be a MARVIN film and this is not to downplay other good workmanlike performances in the film but it will always rank highly in Marvins body of work which is a cut above his contemporaries in the roles for which he was known and appreciated.As for the film it played out in fairly predictable fashion until the final scenes under the golden gate brige which gave a nice twist and left the viewer unsure whether Walker did in fact take his money or simply leave the scene of the set up empty handed. The obvious answer is that he waited till the coast was clear and took his money. It is hard to accept that he did otherwise.In retrospect a movie that stands up 40 odd years later and is just as watchable as it was in 67. No mean feat.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2010
★★★★★ 5
A forerunner to Dirty Harry and Lee Marvin shining...
If you liked "The Getaway" or "Dirty Harry", then meet their forerunner.
"Point Blank" is explosive, fast-paced, and still the acting is there.
Good acting that is.
Lee Marvin is at his best. Angie Dickinson. in her strong performance, is as beautiful as ever. Keenan Wynn and Carroll O'Connor play their parts to the hilt and it truly shows. John Vernon (who was The Mayor in "Dirty Harry") plays a slimy type with diligence and very believable.
Add the killing pace of the entire picture, and you have a hot item, as sharp and cutting as "Film Noir" can be.
Yes, because this is still a "Film Noir", despite the fact that it was filmed in Color and in the mid-sixties.
John Boorman ("Hell in the Pacific", "Deliverance" and "The Emerald Forest"), skillfully "color coded" the entire movie, bringing it from absolute colors at the beginning, to more red-tinted ones towards the end.
The only difference from a true "Film Noir" is its fast-paced storyline, that would lead us to movies as I have mentioned above.
Marvin's minimalistic acting, but forceful presence, is enough to fill every frame of the movie with tension, action and complete mayhem.
Compare him in "The Dirty Dozen" and "The Big Red One" and you will see what I mean.
A big plus was the release on DVD. An excellent transfer with a sharp picture resolution, a clearcut sound, make it a very enticing experience to watch it at home.
This is not just a Highly Recommended title. It is simply a Must!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2007
★★★★★ 5
Whiter teeth with out the trays
Size: 3.8 Ounce (Pack of 1)
Love this toothpaste! My teeth are a lot whiter and brighter. Doesn’t leave a bad taste in my mouth. Highly recommend this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
smile time!!
Size: 3.8 Ounce (Pack of 1)
Love the whiteness! Works in a few weeks!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 8, 2026
★★★★★ 5
Works for removing coffee stains
Size: 3.8 Ounce (Pack of 1)
quit smoking after 25 years. I have been more than 50 days now without a cigarette and my coffee intake has decreased by 99%. I only drink one cup now in the morning. I've used this before and it worked well. However, I had such bad habits, I could never stay on top of it. Well, I started using again just 4 or 5 days ago. And I have noticed a huge difference already. And now I have changed my lifestyle, I feel that I will actually be able to get a better outcome. So far it's working really well to remove those coffee and nicotine cigarette stains. I have been to the dentist since I quit cigarettes. I've got a few cavities that I will be getting fixed in two weeks. So i'm trying to whiten between now and then. I didn't want to use anything too harsh. This does not make my teeth more sensitive.Some whitening toothpastes can increase my sensitivity. Although i'm not a fan of fluoride. I will use fluoride free toothpaste with hydroxyapatite on a regular basis..I just use this as needed. It does produce good results if you, in fact, are really trying to remove those coffee stains. But if you don't change your habits, it only works so much. Also, it's probably gonna work a whole lot better If you have an electric toothbrush. You're just not gonna get the same results using a regular toothbrush, at least not as fast.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 10, 2026